Audi Q7 Owners & Service Manuals

Audi Q7: Settings

Telephone settings

Applies to: vehicles with telephone

  • Applies to: MMI: Select on the home screen: PHONE > .

The following options may be possible, depending on your mobile device:

  • Decline with text message
  • Edit voicemail number

Switching between two mobile devices

Requirement: phone 1 and phone 2 must be connected to the MMI.

Switch telephones: the device name of the available mobile device is displayed. You can switch the phone by pressing the button.

Ringtone and volume settings

  • Ringtone and message volume: you can adjust the volume using the slider.
  • Ringtone: select a ringtone from the list.
  • Microphone input level: you can adjust the input level of the microphone using the slider.

Data module serial number (IMEI)

Applies to: vehicles with data module

The serial number (IMEI) will be displayed.

Contact settings

Applies to: vehicles with telephone

  • Applies to: MMI: Select on the home screen: PHONE > Contacts > .

Switching between two mobile devices

Requirement: phone 1 and phone 2 must be connected to the MMI.

Switch telephones: the device name of the available mobile device is displayed. You can switch the phone by pressing the button.

The directory for the selected phone will be displayed.

Hide grayed-out contacts

When this function is switched on, contacts that have no phone numbers stored for them will be hidden.

Sort order

You can sort the contacts by Last name or First name.

Download contacts

Requirement: a mobile device must be connected to the MMI.

To update the contacts in the MMI, you can manually download your mobile device contacts. Depending on the mobile device, you may need to disconnect and reconnect the Bluetooth connection to update the contacts.

Importing and exporting contacts

Requirement: a USB storage device must be connected to the Audi music interface.

Contacts in vCard format (.vcf) can be imported or exported from the MMI.

  • Importing contacts from a storage device: Requirement: the USB storage device must contain contacts in the vCard format. They must not be located in sub-folders. Select: > Search for import data > USB device 1/USB device 2 > desired contacts or Select all > Start import.
  • Exporting contacts to a storage medium: Requirement: you must have a contact imported.

    Select: > Find exporting source > USB device 1/USB device 2 > desired contacts or Select all > Start export.

Tips

  • The imported contacts are stored in the local MMI memory.
  • There should be no other files or folders on the storage medium containing the contacts to be imported.
  • Contacts that were downloaded from a mobile device cannot be exported.
  • Apple devices and MTP devices (such as smartphones) are not recognized as USB storage devices.

    READ NEXT:

     Messages

    Text messages Applies to: vehicles with telephone Requirement: your mobile device must be connected to the MMI via Bluetooth Message Access Profile (Bluetooth MAP). Applies to: MMI: Select on the ho

     Audi connect

     General information

    Applies to: vehicles with Audi connect Depending on the country and the vehicle equipment, the following functions may be available: Audi connect Infotainment Audi connect vehicle control WARNING

    SEE MORE:

     Coolant System/Coolant

    Connection Diagram - Coolant Hoses Connection Diagram - Coolant Hoses, Vehicles without Parking Heater   Note Blue = large coolant circuit. Red = small coolant circuit. Orange = coolant circuit for the charge air cooler. Brown = heating circuit. Green = coolant circuit for the transmissi

     Overview - Final Drive

    Overview - Rear Final Drive Rear Final Drive 1 - Driveshaft Removing and installing. Refer to → Chapter "Driveshaft, Removing and Installing". Removing and installing on the rear final drive. Refer to → Chapter "Drive Shaft, Removing from Rear Final Drive and Installing"

    © 2019-2024 Copyright www.a-q7.com