Audi Q7: Destination details
Applies to: vehicles with navigation system
.png)
Fig. 148 Details
After you have selected a destination, the details will be displayed. Route guidance is will not be active yet.
The functions depend on the vehicle equipment and the selected destination.
- Map preview: to zoom in on the map preview, press on the map
- Route criteria
- More: additional functions
- Weather: Requirement: the MMI must be connected to the Internet
- Call: Requirement: a mobile device must be connected to the MMI. You will make a call to the phone number that is stored for the destination.
- Start: starts navigation to the displayed destination.
The map will be displayed
- Parking: press Parking to search for a parking space at the destination. You can use the parking space as a destination or stopover
- Details: Requirement: the MMI must be connected to the Internet
- Display of distance/driving time to the destination
- Weather at the destination: Requirement: the MMI must be connected to the Internet
Selecting a destination from the map
Applies to: vehicles with navigation system
A point on the map can be used as the destination.
Opening the map
- Applies to: MMI: Press NAVIGATION on the home screen.
- If necessary, press
.png)
to display the map.
Adjusting the scale
- Select:
.png)
select a scale.
Marking the destination
- Press and hold a point on the map until a marking appears or the address for the selected destination is shown.
Selecting map content (such as POIs) as the destination
Requirement: map content must be displayed.
- Press on map content on the map (for example,
.png)
)
Selecting the destination
- Select:
.png)
> Start.
Stopovers and route plan
Applies to: vehicles with navigation system
You can enter additional destinations during active route guidance.
Entering a stopover
Requirement: route guidance must be active.
- Enter a destination
Displaying stopovers or the route plan
All destinations are listed in the route plan.
- Press on
.png)
Pin the side menu
on the map fig. 149.
Editing stopovers
- Press on
.png)
Pin the side menu
on the map fig. 149. - Adding a stopover: Select: Add destination > select a destination > Add to route.
- Moving a stopover: press
.png)
.
Touch the .png)
symbol
and move the entry to the desired position.Press Done.
- Deleting a stopover: Select:
.png)
> one or more
entries or Select all > Delete > (Done).
Stopping route guidance
Applies to: vehicles with navigation system
Requirement: route guidance must be active and the map must be displayed.
- Applies to: MMI: Press
.png)
fig. 149. - Select in the instrument cluster: Navigation tab >
.png)
button > Cancel route
guidance.
READ NEXT:
Map
Map function
Applies to: vehicles with navigation system
Fig. 149 Active route guidance
Fig. 150 Marked map object
Opening the map
Applies to: MMI: Press NAVIGATION on the
home screen.
If nece
Alternative routes
Applies to: vehicles with navigation system
Fig. 152 Alternative routes in the overview map
Opening alternative routes
Requirement: route guidance must be started
and the map must be displayed
Pre
Map update
Introduction
Applies to: vehicles with navigation system
You can update the map data in the MMI with a
map update. The functions depend on the country
and vehicle equipment.
Map update through onlin
SEE MORE:
Status display
Fig. 14 Upper display: common symbols in the status bar
The symbols in the status bar show you information
at a glance, such as ifa mobile device is connected
or if there is a data connection. The most
common symbols are listed in the table.
There is a data connection. The bar indicates the sign
During a phone call
Applies to: vehicles with telephone
Depending on your mobile device and the type of
connection, the following options may be available
during a call:
End call
Mute
Sending a tone sequence
Press Numbers. You can enter tone sequences
(DTMF) and send them to the other party on the
call.
Hold
Puts t
