Audi Q7: Fastening and unfastening safety belts
Fig. 65 Belt buckle and belt latch
Fig. 66 Releasing the belt buckle from the belt latch
Observe the safety precautions.
Fastening the safety belt
- Pull the safety belt by the belt buckle evenly
across your chest and lap.
- Insert the belt buckle in the belt latch belonging
to the seat until it audibly engages
> fig. 65.
- Pull on the belt to make sure that the belt is securely
locked in the latch.
Unfastening the safety belt
Third row seats: fastening and unfastening safety belts
Applies to: vehicles with third row seats
Fig. 67 Third row seats: unfastening safety belts
Fastening the safety belt
- Hold onto both sides of the safety belt and pull
it down out of the holder.
- Insert the large belt buckle tongue into the belt
latch (2) that belongs to the seat until it latches.
- Pull the safety belt evenly across the chest and
pelvis.
- Insert the small belt buckle tongue into the
belt latch (1) that belongs to the seat until it
latches.
- Pull on the belt to make sure both belt buckles
are latched securely in the latches.
Unfastening the safety belt
- Press the red button on the belt latch (1). The
belt buckle will pop out.
- Press the red button on the belt latch (2). The
belt buckle will pop out.
- Guide the belt back by hand so that the safety
belt can roll up more easily.
- Place both belt buckles back into the holder.
Tips
The large belt buckle tongue can remain inserted
in the belt latch during normal driving.
Then only the small belt buckle tongue needs
to be inserted into the latch (1) in order to
fasten the safety belt.
Safety belt monitoring system
- If the indicator light turns
on or flashes, a
front safety belt is not fastened or it has been unfastened while driving. There
may be additional
audible warning signals.
Adjusting the height of the safety belt
Fig. 68 Belt height adjustment for the front seats - safety
belt relay
- To move the belt higher, slide the safety belt relay
(2) upward.
- To move the belt lower, press the release button
(1) and slide the safety belt relay (2) downward.
- To check if the safety belt relay is securely
locked in place, pull firmly on the belt.
Tips
You can also adjust the height of the front
seats to change the position of the safety
belts.
Additional safety belt functions
Belt retractor lock
The safety belts on the rear seats and on the
front passenger seat are equipped with a belt retractor
lock.
Deactivating or activating the belt retractor lock.
Safety belt retractor
The safety belts are equipped with an automatic
belt retractor. This automatic retractor allows the
safety belt to be pulled all the way out when the
belt is pulled slowly. However, the automatic retractor
locks during sudden braking maneuvers.
It also locks the belts when accelerating, driving
uphill, and driving around curves.
Belt force limiter
Safety belts with belt force limiters reduce the
force placed on the body by the safety belts during
a collision.
Safety belt pretensioners
Safety belts may be tightened with reversible
belt tensioners when you start driving and in certain
driving situations. If the safety belt is too
loose, it will be tightened so that the belt will
rest closer to the body.
- To switch belt tensioners on or off at the beginning
of a trip, select on the home screen: VEHICLE
> Seats.
- To access Additional seat settings, swipe left
or right.
- Switch the Driver seat automatic belt tensioner
or Front passenger seat automatic belt tensioner
functions on or off.
In some collisions, pyrotechnic belt tensioners
may secure the safety belts so that they cannot
loosen. This reduces forward movement by the
vehicle passengers.
WARNING
The pyrotechnic system can only provide protection
during one collision. If the pyrotechnic
belt tensioners deploy, the pretensioning system
must be replaced by an authorized Audi
dealer or authorized Audi Service Facility.
Tips
Smoke may be released when pyrotechnic belt
tensioners deploy. This is not a sign of a vehicle
fire.
READ NEXT:
General information
Applies to: vehicles with memory function
With the memory function, you can save and call
up seat profiles using the memory buttons in the
door trim panel.
Depending on vehicle equ
General information
WARNING
If you have not fastened your safety belt,
you are in an incorrect seating position, or
you are too close to the airbag system, the
airbag system will not be able to p
Fig. 70 Headliner: indicator light to display the status of
the front passenger's airbag
The Advanced Airbag System in your vehicle has
been certified to comply with the requirements
of the United S
SEE MORE:
Applies to: vehicles with Audi adaptive cruise control and efficiency
assist
Fig. 111 Instrument cluster: speedometer: predictive control display
With predictive control, efficiency assist adapts the set speed in adaptive
cruise control (1) based on detected speed
limits and the upcoming route. O
Applies to: vehicles with vehicle jack
Fig. 181 Sill panels: markings
Fig. 182 Sill: positioning the vehicle jack
Place the vehicle jack from the vehicle tool kit
on a firm surface. Use a flat, stable support if
necessary. On a slippery surface such as tile,
you should use a non-slip pad su