Audi Q7: Operating
Fig. 3 Instrument cluster: driver information system
Fig. 4 Left side of multifunction steering wheel
Information is organized within various tabs (1) in
the instrument cluster. The tab contents are displayed
in the central area (2).
Requirement: the ignition must be switched on.
Selecting a tab
- Press the
button (3)
repeatedly until the
desired tab is selected.
Returning to functions at higher levels
- Press the
button (5).
Opening and closing the menu
- Press the
button (6).
Selecting and confirming a function
Requirement: a menu or list must be displayed.
- To select a function, turn the left thumbwheel
(7) to the desired function.
- To confirm a selection, press the left thumbwheel
(7).
Switching the view
- Press the VIEW button (4).
The following tabs may be available, depending
on vehicle equipment:
.png)
READ NEXT:
Fig. 5 Upper display: adjusting the display
Switching the view
Press the VIEW button to switch between the
default view (1) and the enhanced view (2).
Adjusting the layout
Depending on the vehic
The tachometer (2) displays the engine
speed in revolutions per minute (RPM). The beginning
of the red zone in the tachometer indicates
the maximum permissible engine speed for
all gears once the engi
SEE MORE:
1 - Door
Removing and Installing. Refer to
→ Chapter "Door, Removing and Installing".
2 - Bolt
33 Nm
3 - Door Arrester
Installation position. Refer to → Fig.
Removing and Installing. Refer to
→ Chapter "Door Arrester, Removing and Insta
B-Pillar Upper Trim Panel, Removing and Installing
Special tools and workshop equipment
required
Trim Removal Wedge -3409-
Removing
- Release the B-pillar vent -1-
at the upper clip using a small screwdriver
-arrow-.
- Disconnect the connector and remove vent.
WARNING
Follow