1 - Bleed Screw
10 Nm
Before installing, thinly coat with Assembly Paste -G 052 150 A2-.
2 - Protective Cap
3 - Bolt
35 Nm
Replace after removing
When loosening and tightening, counterhold at the guide pin
Self-locking
4 - Gasket
Replace afte
Removing
- Remove the door window. Refer to
→ Chapter "Front Door Window, Removing and Installing".
- Release the retainers -3 and 4-
on the threaded pins -2- for the
window regulator using an 11 mm socket. To do so, slide the
socket onto the threaded pin.
- Unclip the wind