Extremely Dangerous Due to High-Voltage
The high-voltage system is under high-voltage. Death or serious
bodily injury by electric shock.
- Individuals with electronic/medical life- and health su
Caution
Non-approved tools or materials such as leak sealing
additives can cause damage or malfunctions in the
system.
Only use tools and materials approved by the
manufacturer.
The warran
WARNING
Risk of short circuit
The A/C compressor works with up to 288 volts at 800
to 8,600 RPM.
Do not touch the A/C compressor when the ignition is
turned on or when the drive machines ar
Note
Both rear axle air lines (blue and black) are completely
replaced if there is a damage claim. The repair of a damaged
line is not permitted.
The front axle and pressure reservoir air lines are routed
in the wiring harness and can be repaired.
Special tools and workshop equipment
Removing
- Remove the rear lid seal from the body flange.
Installing
Install in reverse order of removal and note the following:
- Install the rear lid seal on the body flange in the
sequence: -1, 2 and 3-.
- Align the mark -A- on the rear
lid seal to the center roof frame seal hole