Audi Q7: Settings
Applies to: vehicles with navigation system
You can adjust the navigation system settings in
the instrument cluster and in the MMI display
separately. The settings depend on the country
and vehicle equipment.
Accessing settings
- Applies to: MMI: Select on the home screen:
NAVIGATION > .
Accessing settings using the multifunction
steering wheel
- Select in the instrument cluster: Navigation tab
> button.
A setting made using the multifunction steering
wheel only applies to the instrument cluster
map.
Traffic: you can display current traffic information
on the map.
- Free flowing traffic
- Traffic obstructions
- Traffic incidents
Map colors
- Automatic: the map display adapts to the lighting
conditions (for example, by changing from
day to night when driving through a tunnel).
- Day or Night
Map orientation
- 2D heading-up map/2D north-up map: the
current vehicle position is displayed. The map is
oriented in the direction of travel or to the
north.
- 3D heading-up map: the current vehicle position
is shown on a three-dimensional map and
is aligned to the direction of travel.
- Overview: the entire route from the vehicle position
to the destination or the next stopover is
displayed on the map. The map is oriented to
the north.
Automatic zoom
- On: the map scale is adapted automatically depending
on the type of road being traveled (expressway,
highway, other roads) so that you always
have an optimal overview of the road
ahead. When route guidance is active, the scale
is adjusted automatically for a better detailed
view when there are upcoming maneuvers.
- Intersection: when route guidance is active, the
scale is adjusted automatically for a better detailed
view when there are upcoming maneuvers.
- Off
MMI map contents/Map content: you can switch
the display of additional information (such as
POls) on the map in the center display on or off.
Voice guidance
Voice guidance: with the Traffic setting, the MMI
will only give prompts if there are traffic incidents
on your route.
Voice guidance during phone call
Entertainment fader during navigation: the audio
playback volume is temporarily lowered when
navigation prompts are active.
Route criteria
You can adjust which route criteria should be allowed
or avoided for the route calculation.
HOV/carpool lanes
Highways
Toll roads
Ferries
Route information
When this function is switched on and route
guidance is active, route information
fig. 149 is displayed. The next maneuver
will be displayed at the bottom. POls and
traffic information will also be displayed. Press
route information to display a preview of the next
maneuver on the map. You can switch the following
information on or off in route information.
- Points of interest along the route
- Traffic information along the route
Predictive route guidance
The predictive route guidance is switched off
when the vehicle is delivered from the factory.
Your trips are recorded and destinations are suggested
by the MMI when this function is switched on.
Presentation mode
In presentation mode, the system simulates driving
on the display along the planned route without
the vehicle actually moving. You can use
Specify starting point when you would like to
calculate a route starting from a location other
than the current vehicle position, for example.
Simulating route guidance: start route guidance
and press presentation mode.
Tips
You can change the volume of navigation announcements
while one is playing.
READ NEXT:
Selecting the radio
Fig. 154 Upper display: FM station list
Fig. 155 Upper display: SiriusXM channel list
Depending on the vehicle equipment, the radio
may support the FM, AM, and SiriusXM (satell
Overview
Fig. 156 Center display: left side: playback view of radio functions, right
side: sources
Operating
Applies to: MMI: To open the playback view (1),
select on the home screen: RADIO >
SEE MORE:
General Information - Rearview Camera System
The rear view camera system (KA2) assists the driver during
back-up driving by providing the driver with an image of the
traffic situation behind the vehicle via the Front Information
Display Control Head -J685-.
The rear view camera system is switched
Refrigerant R134a Physical Data
Vehicle air conditioning systems make use of the
vaporization and condensation process. In this case, one works
with a substance which boils easily, designated as refrigerant.
The refrigerant used is tetrafluoroethane R134a, which boils
at -26.5 ºC (-15.7 ºF) at