Overview - A/C Compressor Power Unit, Vehicles with 6-Cylinder TFSI Engine
1 - Ribbed Belt
Check for wear
Mark the running direction and install on the correct side
Removing and install
A/C Compressor, Removing from and Installing on Bracket, Vehicles with
6-Cylinder Engine
Caution
This procedure contains mandatory replaceable parts.
Refer to component overview prior to st
Information on the Mechanically Driven A/C Compressor
Note
At the start of production, the A/C compressors manufactured
by "Denso" (type "6 SEU 14") are installed. A/C compressors from
oth
Calibration Device - VAS721001-, Installing and Aligning
After performing service work on the vehicle, it may be
necessary to calibrate the peripheral camera system. In detail,
this is the case after:
Replacing one or more cameras
Peripheral Camera Control Module -J928- replacement
Flash the
Special tools and workshop equipment
required
Spreader Tool -3424-
Torque Wrench 1332 40-200Nm -VAG1332-
Engine and Gearbox Jack -VAS6931-
Engine/Gearbox Jack Adapter - Wheel Hub Support -T10149-
Ball Joint Splitter -VAS251805-
Removing
Before starting work:
- Versions with coil springs