Audi Q7: Identification
Transmission Identification
Location of Code Letters on the Transmission
- Transmission code letters are located on the type label
under the transmission. Type label component location
-arrow-.
Transmission Code and Transmission Serial Number
Example:
1 - Transmission Serial Number
2 - Parts List Number
3 - Manufacturer Transmission Code: 8HP-55
4 - Transmission Code Example: MNX
Note
- The transmission codes are also on the vehicle data labels.
- Refer to
→ for the vehicle data label location.
READ NEXT:
Safety Precautions when Working on Vehicle
Pay Attention to the Following to Avoid Personal Injury and
Vehicle Damage:
WARNING
Risk of injury and accident by accidentally engaging
a selecto
Guidelines for Clean Working Conditions
Thoroughly clean the connection points and the surrounding
area before loosening.
Clean the transmission and transmission components using
Cleaning Solutio
Capacities
Capacities, ATF Area in the Transmission
Caution
There is a risk that the transmission could
malfunction or fail.
Only use the ATF available as a replacement part
with the 0D5 a
SEE MORE:
Overview - Airbag Control Module
1 - Center Tunnel
2 - Nut
9 Nm
Quantity: 4
The thread must be paint and contaminant free, nut and ground pins
serve as ground connection for the control module.
3 - Airbag Control Module -J234-
Removing and installing. Refer to
Note
Cleaning the refrigerant circuit means flushing with
refrigerant R134a. Refer to
→ Chapter "Refrigerant Circuit, Cleaning (Flushing), with
Refrigerant R134a".
If a faulty A/C compressor is replaced with an A/C
compressor from another manufacturer check for the A/C
compres
