Audi Q7: Overview - Bench Seat/Single Seat, Seat High, Center Second Row Seat
1 - Trim Panel Outer Piece
- For hinge on tunnel side
- Removing and installing. Refer to
→ Chapter "Hinge Tunnel-Side Trim Panel, Removing and Installing, Seat
High, Outer Second Row".
2 - Trim Panel Inner Piece
- For hinge on tunnel side
- Removing and installing. Refer to
→ Chapter "Hinge Tunnel-Side Trim Panel, Removing and Installing, Seat
High, Outer Second Row".
3 - Bolt
- 50 Nm
- Seat, removing and installing. Refer to
→ Chapter "Seat High, Removing and Installing, Center Second Row".
4 - Seat Cushion
- Overview. Refer to
→ Chapter "Overview - Cover and Cushion, Second Row Seat Pan High".
5 - Cushion Insert
- Removing and installing. Refer to
→ Chapter "Cover and Cushion, Removing and Installing".
6 - Rear Three-Point Seat Belt in the Center Seating Position
- Overview. Refer to
→ Chapter "Overview - Rear Center Three-Point Seat Belt".
7 - Headrest
- Overview. Refer to
→ Chapter "Overview - Headrest and Headrest Guide, Center Second Row
Seat".
8 - Backrest Cushion
- Overview. Refer to
→ Chapter "Overview - Cover and Cushion, Second Row Backrest with Center
Armrest".
9 - Center Armrest
- Overview. Refer to
→ Chapter "Overview - Rear Seat Backrest, Second Row Backrest with
Center Armrest".
10 - Trim Panel Inner Piece
- For the seat rail
- Removing and installing. Refer to
→ Chapter "Seat Rail Trim Panel, Removing and Installing, Seat High,
Center Second Row".
11 - Bolt
- 50 Nm
- Quantity: 2
- Seat, Removing and installing. Refer to
→ Chapter "Seat High, Removing and Installing, Center Second Row".
12 - Trim Panel Outer Piece
- For the seat rail
- Removing and installing. Refer to
→ Chapter "Seat Rail Trim Panel, Removing and Installing, Seat High,
Center Second Row".
13 - Seat Belt Latch
- Overview. Refer to
→ Chapter "Overview - Rear Seat Belt Latch, Second Row".
14 - Bolt
- 50 Nm
- Seat, Removing and installing. Refer to
→ Chapter "Seat High, Removing and Installing, Center Second Row".
Overview - Bench Seat/Single Seat, Third Row Seat
1 - Nut
2 - Control Module Bracket
- Removing and installing. Refer to
→ Chapter "Seat Adjustment Control Module, Removing and Installing,
Third Row".
3 - Third Row Seat Adjustment Control Module -J857-
- Removing and installing. Refer to
→ Chapter "Seat Adjustment Control Module, Removing and Installing,
Third Row".
4 - Grommets
- Quantity: 2
- For securing the rear bench seat
- Clipped into the vehicle floor
- Replace each time the rear bench seat is removed
5 - Seat Cushion
- Overview. Refer to
→ Chapter "Overview - Cover and Cushion, Third Row Seat Pan".
- The seat frame must engage correctly in the mount.
6 - Seat Belt Latch
- Overview. Refer to
→ Chapter "Overview - Rear Seat Belt Latch, Third Row".
7 - Bolt
- 50 Nm
- Seat, removing and installing. Refer to
→ Chapter "Third Row Seat, Removing and Installing".
8 - Seat Frame Trim Panel
- Removing and installing. Refer to
→ Chapter "Seat Frame Tunnel-Side Trim Panel, Removing and Installing,
Third Row".
9 - Backrest Cushion
- Overview. Refer to
→ Chapter "Overview - Cover and Cushion, Third Row Backrest".
10 - Head Restraint
- Overview. Refer to
→ Chapter "Overview - Headrest, Third Row Seat".
11 - Guide
- For the lower child seat anchor
- Quantity: 4
- Removing and installing. Refer to
→ Chapter "Lower Child Seat Anchor Guide, Removing and Installing,
Second and Third Row".
12 - Bolt
- 50 Nm
- Seat, removing and installing. Refer to
→ Chapter "Third Row Seat, Removing and Installing".
13 - Connectors
Overview - Bench Seat/Single Seat, Seat Low Trim Panels, Outer Second Row
Seat
1 - Front Trim Panel
- For stand support on side sill side
- Removing and installing. Refer to
→ Chapter "Stand Support Front Trim Panel on Side Sill Side, Removing
and Installing, Seat Low, Outer Second Row".
- Press on until it engages audibly
2 - Trim Panel
- For stand support on tunnel-side
- Removing and installing. Refer to
→ Chapter "Stand Support Tunnel-Side Trim Panel, Removing and
Installing, Seat Low, Second Row".
- Press on until it engages audibly
3 - Expanding Clip
4 - Seat Side Trim Outer Piece
- Tunnel-side
- Removing and installing. Refer to
→ Chapter "Seat Side Trim on Tunnel Side, Removing and Installing, Outer
Second Row Seat".
5 - Expanding Clip
6 - Seat Side Trim Inner Piece
- Tunnel-side
- Removing and installing. Refer to
→ Chapter "Seat Side Trim on Tunnel Side, Removing and Installing, Outer
Second Row Seat".
7 - Backrest Hinge Cover
- Removing and installing. Refer to
→ Chapter "Backrest Hinge Cover, Removing and Installing".
8 - Cap
- For the child seat anchor
- Quantity: 4
- Removing and installing. Refer to
→ Chapter "Lower Child Seat Anchor Guide, Removing and Installing,
Second and Third Row".
- Must be secure in the anchor
9 - Guide
- For the lower child seat anchor
- Quantity: 4
- Removing and installing. Refer to
→ Chapter "Lower Child Seat Anchor Guide, Removing and Installing,
Second and Third Row".
- Must be secure in the anchor
10 - Seat Side Trim Inner Piece
- Side sill side
- Removing and installing. Refer to
→ Chapter "Seat Side Trim on Side Sill Side, Removing and Installing,
Outer Second Row Seat".
11 - Handle
- For backrest release
- Removing. Refer to
→ Chapter "Rear Seat Backrest Locking Mechanism Handle, Removing and
Installing, Seat High, Outer Second Row".
12 - Expanding Clip
13 - Rear Trim Panel
- For stand support on side sill side
- Removing and installing. Refer to
→ Chapter "Stand Support Rear Trim Panel on Side Sill Side, Removing and
Installing, Seat Low, Outer Second Row".
- Carefully slide into the mount on the stand support and lock to the
inner trim panel
14 - Seat Side Trim Outer Piece
- Side sill side
- Removing and installing. Refer to
→ Chapter "Seat Side Trim on Side Sill Side, Removing and Installing,
Outer Second Row Seat".
15 - Expanding Clip
16 - Bolt
17 - Bracket
- For seat side trim on side sill side
- Removing and installing. Refer to
→ Chapter "Seat Side Trim on Side Sill Side, Removing and Installing,
Outer Second Row Seat".
READ NEXT:
1 - Trim Panel
For stand support on tunnel-side
Removing and installing. Refer to
→ Chapter "Stand Support Tunnel-Side Trim Panel, Removing and
Installing, Seat Low, Second Row
1 - Right Stand Support
2 - Lock Washer
3 - Front Mount
For seat/backrest frame
4 - Locking Mechanism
For seat frame
5 - Spiral Spring
6
Overview - Headrest and Headrest Guide, Outer Second Row Seat
1 - Backrest Frame
2 - Headrest Guide with Locking Spring
Installed on left side of backrest
Removing and install
SEE MORE:
Applies to: vehicles with Audi pre sense basic
Audi pre sense basic is automatically active at
speeds of approximately 20 mph (30 km/h) and
higher. Audi pre sense basic can trigger preemptive
safety measures during emergency braking
and dangerous braking maneuvers as well as in
unstable driving situ
Fig. 98 Front area: sensors and cameras
Fig. 99 Rear area: sensors and cameras
Front area
Depending on the vehicle equipment, the following
sensors and cameras may be installed:
Laser scanner in the front of the radiator grille
Camera behind the windshield
Peripheral cameras on the exterio