Audi Q7 Owners & Service Manuals

Audi Q7: Power sources

When the ignition is switched on, you may be able to use multiple power sources for external devices, depending on the vehicle equipment.

12 volt sockets

You can connect electrical accessories to the 12 volt sockets. The power usage from the sockets must not exceed a total of 120 watts. Do not connect multiple devices to the sockets in the vehicle at the same time.

The 12 volt sockets are labeled with the 12V symbol. They are located in the front center console, in the rear* and on the side trim panel in the luggage compartment".

USB ports

Applies to: vehicles with USB ports

You can charge mobile devices using the USB ports. Depending on the vehicle, the USB ports may be labeled with one of the following symbols: , , or CHARGE ONLY.

WARNING

  • To reduce the risk of fatal injury, store all connected devices securely when driving so that they do not move around inside the vehicle when braking or in the event of an accident.
  • Incorrect usage can lead to serious injuries or burns. To reduce the risk of injuries, never leave children unattended in the vehicle with the vehicle key.

Note

  • Read the operating manuals for the connected devices.
  • To reduce the risk of damage to the vehicle electrical system, never attempt to charge the vehicle battery by connecting accessories that provide power to the power sources.
  • Do not connect any device whose network class (voltage) does not match the network class designed for the socket.
  • Disconnect the connectors from the power sources carefully to reduce the risk of damaging them.

Tips

Do not connect any other devices to the sockets when using the compressor* provided by the factory. The power consumption in the sockets may be temporarily exceeded when using the compressor*.

    READ NEXT:

     Cup holders

    Applies to: vehicles with cup holders Fig. 76 Front center console: cup holder Fig. 77 Center armrest in the second row*: cup holder Your vehicle has cup holders in the front center console, in

     Luggage compartment

    General information All pieces of luggage or objects must be securely fastened in the luggage compartment. Note the following to maintain good vehicle handling: Distribute the load evenly in the lug

     Luggage compartment cover

    Applies to: vehicles with power luggage compartment cover Fig. 78 Luggage compartment: retracted cover Fig. 79 Luggage compartment: removing and installing the luggage compartment cover Observe th

    SEE MORE:

     Underbody Trim Panel

    Overview - Underbody Trim Panels 1 - Nut 2.5 Nm Quantity: 2 2 - Bolt 2.5 Nm Quantity: 4 3 - Bolt 6 Nm 4 - Front Underbody Panel There are different versions. Refer to the Parts Catalog. Removing and Installing. Refer to → Chapter "Under

     Rearview Camera System

    General Information - Rearview Camera System The rear view camera system (KA2) assists the driver during back-up driving by providing the driver with an image of the traffic situation behind the vehicle via the Front Information Display Control Head -J685-. The rear view camera system is switched

    © 2019-2024 Copyright www.a-q7.com