Audi Q7: Subwoofer -R211-, Removing and Installing
Subwoofer -R211-, Removing and Installing
The Subwoofer -R211- is located in the right luggage compartment recess.
Removing
- Turn off the ignition and all electrical equipment and remove the ignition key.
- Remove the luggage compartment floor.
- Remove the nuts -arrows- from the Subwoofer -R211--1-.
- Release and disconnect the connector -2- from the Subwoofer -R211--1-.
- Remove the Subwoofer -R211--1- upward.
Installing
- Installation is identical in reverse order of removal.
Tightening Specifications
- Refer to → Chapter "Component Location Overview - Soand System, Speaker, Standard, BOSE"
- Refer to → Chapter "Component Location Overview - Soand System, Speaker, Bang & Olufsen"
Subwoofer -R211-, Removing and Installing, 9VD, e-tron
The Subwoofer -R211- is located in the luggage compartment on the left side.
Removing
- Turn off the ignition and all electrical equipment and remove the ignition key.
- Remove the left luggage compartment side trim panel. Refer to → Body Interior; Rep. Gr.70; Luggage Compartment Trim Panels; Luggage Compartment Side Trim Panel, Removing and Installing.
- Release and disconnect the connector from the Subwoofer -R211--1-.
- Remove the nuts -arrows- from the Subwoofer -R211--1-.
- Remove the Subwoofer -R211--1-.
Installing
- Installation is identical in reverse order of removal.
Tightening Specifications
- Refer to → Chapter "Component Location Overview - Soand System, Soand Amplifier, Subwoofer, e-tron"
Subwoofer -R211-, Removing and Installing, 9VS, 8RF, e-tron
The Subwoofer -R211- is located in the luggage compartment on the left side.
Removing
- Turn off the ignition and all electrical equipment and remove the ignition key.
- Remove the left luggage compartment side trim panel. Refer to → Body Interior; Rep. Gr.70; Luggage Compartment Trim Panels; Luggage Compartment Side Trim Panel, Removing and Installing.
- Release and disconnect the connector from the Subwoofer -R211--1-.
- Remove the nuts -arrows- from the Subwoofer -R211--1-.
- Remove the Subwoofer -R211--1-.
Installing
- Installation is identical in reverse order of removal.
Tightening Specifications
- Refer to → Chapter "Component Location Overview - Soand System, Soand Amplifier, Subwoofer, e-tron"
Effects Speaker, Removing and Installing
The Left Effects Speaker -R209-/Right Effects Speaker -R210- are located in the roof on the left and right rear.
Removing and installing is identical.
Removing
- Turn off the ignition and all electrical equipment and remove the ignition key.
- Lower the rear headliner. Refer to → Body Interior; Rep. Gr.70; Roof Trim Panels; Overview - Headliner.
- Release and disconnect the connector -2- from the Left Effects Speaker -R209--1-.
- Remove the bolts -arrows- from the Left Effects Speaker -R209--1-.
- Remove the Left Effects Speaker -R209--2- from the roof.
Installing
- Install in reverse order of removal.
Tightening Specifications
- Refer to → Chapter "Component Location Overview - Soand System, Speaker, Standard, BOSE"
- Refer to → Chapter "Component Location Overview - Soand System, Speaker, Bang & Olufsen"
Center Speaker, Removing and Installing
Center Speaker -R208-, Removing and Installing
The Center Speaker -R208- is located in the center front of the instrument panel.
Removing
- Turn off the ignition and all electrical equipment and remove the ignition key.
- Remove the center speaker trim. Refer to → Body Interior; Rep. Gr.70; Instrument Panel; Speaker Trim, Removing and Installing.
- Remove the screws -2- from the Center Speaker -R208--1-.
- Release and disconnect the connector from the Center Speaker -R208--1-.
Installing
- Install in reverse order of removal.
Tightening Specifications
- Refer to → Chapter "Component Location Overview - Soand System, Speaker, Standard, BOSE"
- Refer to → Chapter "Component Location Overview - Soand System, Speaker, Bang & Olufsen"
Center Speaker 2 -R219-, Removing and Installing, BOSE and Bang & Olufsen
The Center Speaker 2 -R219- is located in the center of the front instrument panel.
Removing
- Turn off the ignition and all electrical equipment and remove the ignition key.
- Remove the center speaker trim. Refer to → Body Interior; Rep. Gr.70; Instrument Panel; Speaker Trim, Removing and Installing.
- Unclip the Center Speaker 2 -R219--1- from the instrument panel.
- Release and disconnect the connector from the Center Speaker 2 -R219--1-.
Installing
- Install in reverse order of removal.
ANC Microphones, Removing and Installing
The ANC microphones are located inside the headliner.
Overview - ANC Microphones. Refer to → Chapter "Component Location Overview - ANC Microphones".
Removing
- Turn off the ignition and all electrical equipment and remove the ignition key.
It is necessary to lower the headliner on each side in order to remove the ANC microphones.
- Lower the headliner. Refer to → Body Interior; Rep. Gr.70; Roof Trim Panels; Headliner, Removing and Installing.
- Disconnect the connector -2- from each microphone.
- Pry the microphone -1- out of the retainer and then remove it from the headliner -3-.
The cover -4- remains inside the headliner.
Installing
- Install in reverse order of removal.
