Tower Brace Additional Reinforcement, Removing and Installing, Q7
without High-Voltage System
Special tools and workshop equipment
required
Pry Lever -80-200-
Torque Wrench 1331 5-50Nm -VAG1331-
Removing
- Remove the plenum chamber cover. Refer to
→ Body Exterior; Rep. Gr.50;&
Even a small amount of contamination can lead to
malfunctions. Therefore, observe the following guidelines for
cleanliness when working on the A/C system:
Immediately seal the open lines and connections with clean
plugs, for example from the Engine Bung Set -VAS6122-.
Place the removed compone
