The type label for refrigerant and filling capacities is
located on the hood.
1 - Refrigerant oil identification (here PAG oil) and additional
information. Refer to
→Fluid Capacity Tab
Front Seat Heating
Note
Depending on vehicle equipment, there are different versions
of the A/C system for the Audi Q7. Make sure to use the correct
version and pay attention to the allocati
Removing
- Turn the light switch to position "0".
- Press the tab -3- in using a
flat-head screwdriver and pry out the glove compartment lamp
-2-.
- Disconnect the connector -1-.
Installing
Install in the reverse order of removal while noting the
following:
- Insert the glove
Removing
- Disconnect the ground cable from the battery when the
ignition is switched off. Refer to
→ Chapter "Battery, Disconnecting and Connecting".
- Remove the front sill panel. Refer to
→ Body Interior; Rep. Gr.70; Vehicle Interior Trim Panels; Sill
Panel,