Audi Q7 Owners & Service Manuals

Audi Q7: Head restraints

General information

Applies to: vehicles with adjustable head restraints

Fig. 60 Correctly-adjusted head restraint
Fig. 60 Correctly-adjusted head restraint

Make sure that:

  • The upper edge of the head restraint is as even as possible with the top of your head
  • The head restraint is as close as possible to the back of the head
  • The head restraints on rear seats that are occupied are raised up at least one level.

WARNING

  • There is one head restraint for each seat. All vehicle occupants must adjust the head restraint correctly before every trip. Having head restraints that are not adjusted correctly or not installed in the vehicle increases the risk of a neck injury during sudden or unexpected driving or braking maneuvers or in a collision.
  • Only remove the rear seat head restraints if it is necessary to install a child safety seat. Stow the removed head restraints securely, for example in the luggage compartment. Reinstall the head restraints immediately once the child safety seat has been removed. Driving without head restraints increases the risk of serious neck injuries.

Front head restraints

Applies to: vehicles with adjustable head restraints

Fig. 61 Front seat: adjusting the head restraint
Fig. 61 Front seat: adjusting the head restraint

Adjusting the head restraints

  • To adjust the head restraint upward or forward, slide it until it locks into place.
  • To adjust the head restraint downward or backward, press the button on the side and slide the head restraint. Release the button and slide the head restraint farther until it locks into place.

Rear head restraints

Applies to: vehicles with adjustable head restraints

Fig. 62 Rear seat: adjusting or removing the head restraint
Fig. 62 Rear seat: adjusting or removing the head restraint

Adjusting the head restraints

  • To adjust the head restraint upward, slide it until it locks into place.
  • To adjust the head restraint downward, press the button (2) and slide the head restraint. Release the button and slide the head restraint farther until it locks into place.

Third row seats: adjusting the head restraint

Applies to: vehicles with third row seats

The head restraints are automatically folded in when the backrest is folded down.

  • To fold the head restraint in manually, pull on the release loop under the head restraint.

You must manually unfold the head restraint after unfolding the backrest.

  • Unfold the head restraint by tilting it upward until you feel it click into place.

Removing the head restraints

Applies to: vehicles with removable head restraints

  • Fold the backrest forward slightly.
  • Move the head restraint upward all the way.
  • Insert a suitable object, such as the extended vehicle key or mechanical key, into the release point (1) on the inside or outside of the base.
  • Press the button (2) and pull the head restraint out of the backrest.

Installing the head restraints

  • Fold the backrest forward slightly.
  • Slide the posts on the head restraint down into the guides until the posts click into place.
  • Press the button (2) and slide the head restraint all the way down. It should not be possible to remove the head restraint from the backrest without pressing the button.

    READ NEXT:

     Safety belts

    General information Each seat is equipped with a three-point safety belt. Safety belts that are worn correctly are the most effective way to reduce the risk of serious or fatal injuries in a collision

     Fastening and unfastening safety belts

    Fig. 65 Belt buckle and belt latch Fig. 66 Releasing the belt buckle from the belt latch Observe the safety precautions. Fastening the safety belt Pull the safety belt by the belt buckle evenly

     Memory function

    General information Applies to: vehicles with memory function With the memory function, you can save and call up seat profiles using the memory buttons in the door trim panel. Depending on vehicle equ

    SEE MORE:

     Audi connect Infotainment services

    Configuration Applies to: vehicles with Audi connect Infotainment Some Audi connect Infotainment services must be configured through your personal myAudi account at my.audi.com before using them for the first time. Tips A myAudi user must be logged in for some Audi connect Infotainment services.

     Rear Window

    Overview - Rear Window 1 - Rear Window Before removing, disconnect all the connectors and secure the contacts toward the inside to the middle of the window glass using adhesive tape. Removing and Installing. Refer to → Chapter "Rear Window, Removing and Installing". 2 -

    © 2019-2024 Copyright www.a-q7.com