Audi Q7: Wheel Bolts
Wheel Bolt Types
Note
Make sure the correct wheel bolts are installed. Refer to
the Parts Catalog.
Standard, One-Piece Wheel Bolt
Two-piece wheel bolt, short turnable spherical calotte,
primarily for S models.
Two-piece wheel bolt, short turnable spherical calotte,
primarily for S models.
Anti-Theft Wheel Bolts
1 - Anti-theft wheel bolts
2 - Cap
3 - Wheel bolt adapter
Master Sets for Anti-Theft Wheel Bolts
Special tools and workshop equipment
required
- Torque Wrench 1332 40-200Nm -VAG1332-
- Wheel Lock Set -T10101-
- Wheel Lock Set -T10101A-
- Wheel Lock Set -T40004-
- Wheel Lock Set -T40073-
READ NEXT:
Only install tires with the same manufacturer, construction
type and tread on all wheels.
Always replace rubber valve when replacing steel wheel or
rim.
Install tires with DOT identification facing
Special tools and workshop equipment
required
Torque Wrench 1332 40-200Nm -VAG1332-
Wheel Lock Set -T10101-
Wheel Lock Set -T10101A-
Wheel Lock Set -T40004-
Wheel Lock Set -T40073-
Wax Spray -
SEE MORE:
Special tools and workshop equipment
required
Trim Removal Wedge -3409-
Removing
- Pry the instrument panel side cover
-1- off using the -3409--arrow-
and remove it.
Installing
Install in reverse order of removal.
Installation notes, for example tightening specifications,
replacing comp
Component Location Overview - Gaskets, 0DB and 0D2
1 - Right Flange Shaft
Removing and installing. Refer to
→ Chapter "Right Seal, Replacing".
Final drive 0DB: the right and left flange shaft are identical
Final drive 0D2: -Arrow a- shaft
diameter approximately 40 mm
2
