Audi Q7: Maintenance and Care

 Door, Removing and Installing

Removing - Disconnect the door connector -2- from the B-pillar. Refer to → Electrical Equipment; Rep. Gr.97; Connectors. - Tape off the B-pillar in the door arrester area using adhesive tape, so that the paint will not be damaged. - Remove the bolt -1- for the doo

 Refrigerant Circuit, Charging with Service Station

  Note The entire refrigerant charge can be added to either the high or low pressure side. Refer to → Chapter "Refrigerant R134a Capacities, Refrigerant Oil and Approved Refrigerant Oils". The work procedure is always to be performed as described in the operating instructions for