Audi Q7: Gear Oil
READ NEXT:
Component Location Overview - Drain and Check Plugs, 0BD, 0D2
-Arrow A- Fill and Check Plugs
for Gear Oil
Tightening specification: 15 Nm
-Arrow B- Gear Oil Drain Plug
Tightening specification:
Gear Oil, Checking Level, 0DB and 0D2
Special tools and workshop equipment
required
Drip Tray
Caution
This procedure contains mandatory replaceable parts.
Refer to component overview pri
Gear Oil, Draining, 0D3 "Sport Differential"
Special tools and workshop equipment
required
Drip Tray
Caution
This procedure contains mandatory replaceable parts.
Refer to component overv
SEE MORE:
Rear Lower Transverse Link, Removing and Installing
Special tools and workshop equipment
required
Torque Wrench 1332 40-200Nm -VAG1332-
Engine and Gearbox Jack -VAS6931-
Engine/Gearbox Jack Adapter - Wheel Hub Support -T10149-
Removing
Before starting work:
- Versions with coil springs: d
Removing
- Remove the rear door trim panel. Refer to
→ Body Interior; Rep. Gr.70; Rear Door Trim Panels; Rear Door
Trim Panel, Removing and Installing.
- Disconnect the connector -3-.
- Release the catch -arrow A- on
the cable -2- downward from the
support bracket
Component Location Overview - Drain and Check Plugs
