Headlamp Housing, Removing and Installing
Removing
- Turn on the ignition and disconnect the ground cable from
the battery. Refer to
→ Chapter "Battery, Disconnecting and Connecting".
-&
The following test and adjustment description applies to all
countries.
However, national guidelines or regulations of the country
must be observed.
HID Headlamp, Adjusting
Special tools and wor
Special tools and workshop equipment
required
Drill
Drill 3.0 mm diameter, 6.5 mm diameter
Protective Eyewear
Removing
- Remove the door trim panel. Refer to
→ Chapter "Front Door Trim Panel, Removing and Installing".
- Place the trim panel on a soft surface.
- Remove th
Coolant
The engine cooling system is filled with a mixture
of purified water and coolant additive at the factory.
This coolant must not be not changed.
The coolant level is monitored using the
indicator
light. However, you should occasionally
check the coolant level.
Messages
The following messag